ARGOX X-3200 DRIVER

Do not touch print head surface by bare hands or with any hard equipment. Print Head Print Line Position Repeat if necessary until the cotton is clean after it is passed over the head. Select Install printer drivers and Click “Next” 65 8. However, please be noted, too much tension at ribbon supply may result in ribbon not moving smoothly.

Uploader: Akinogal
Date Added: 2 February 2008
File Size: 6.31 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 58553
Price: Free* [*Free Regsitration Required]

To enable Peeling function, set by the LCD panel.

We have no responsibility for argod content of the linked website s. Steps to adjust are as below: Printer will enter Dump mode after printing configuration.

ARGOX X Label Printer

The procedure above is for first time installation or after cutter jam. If the data has been sent, but there is no output from the printer.

Cheras Kuala Lumpur. Then paper can be removed from the cutter as Figure 2.

afgox Repeat if necessary until the cotton is clean after it is passed over the head. Repeat the same process until the printing quality is well balanced on both ends of the label. Even though the “Add Printer Wizard” is from Microsoft, it too easily performs a number of tasks incorrectly when updating existing drivers.

  DCR-TRV240 NTSC DRIVER DOWNLOAD

ARGOX X-3200

Programmable by command Data format: However as no port contention is made for this printer, if both PCs transmit data at the same time the data may become damaged in the s-3200 buffer. Since 05 Oct A label is printed. Rotate the control knob clockwise to increase ribbon tension; rotate it counter-clockwise to reduce ribbon tension. The viewing direction is facing the machine, and using hex socket screw driver for the adjustment.

After cutting, the printer will feed the label for 8 inches. Printer performs Auto Calibration after printing the first label, if label height differs from parameters in printer’s flash.

Serial rs Port Peel-off mode peels backing material away from the label as it prints.

Water or spit should be kept away in case of corrosion on heating elements. Figure 2 13 2 Head Latch Bracket 3. The content of the pages of this website is for your general information and use only. Press the FEED button for the next language. Close the top access door and turn on the printer or press the FEED button if the printer is already on. From the leading end of the media roll remove enough labels to expose 6-inches of backing paper. On the contrary, DHCP setting is enabled.

  AMD CATALYST 11.10 PREVIEW 3 DRIVER DOWNLOAD

Turn the head latch counter-clockwise and open the bracket. This utility enables to true type font TTF and load the fonts into printers.

The Prudour News The Barcode Readers Industry is highlights the current market size and future growth potential of the market at the global and regional level with the help of Insert the ribbon roll onto the ribbon supply spindle.

Guillotine Cutter With Paper Jam Advanced Installation And Adjustment For technical and pin-out information, please arggox to the Technical Reference in this manual.

Then release the buttons to enter settings.

Cleaning the Media Compartment Clean the media compartment with a cotton bud that has been moistened with a mild detergent.